I just hate wasting all of the heat created while running the engine or generator. The Travco has an electric water heater and I know that it is possible to get one that heats with propane, electric and engine heat. So I think it would be awesome to have a manifold that would allow me to use either engine (coach) coolant or generator coolant to heat the water in the water heater. In the Winter I could also use the return heat from that line to heat the rear compartment area. Then, another thought came to mind. What about using some coils and insulated hose with a pump to convey heat from the campfire to heat water and heat the compartment?
So it looks like Suburban makes a water heater that is direct spark LP, with electric and "motor aid"SW6DEM
Update: Thursday I will be picking-up a used version of the above for FREE... well I may need to provide some free slave labor in return, LOL! Assuming it works and will fit the Travco properly, I will be in better shape! No more running the generator just to heat the water, I can use LP instead. And every time I run the genny, it will heat the water with the motor assist! Plus, when I am at a site with electric, I don't have to use the LP or Genny to heat the water, YEAH!
Update update: I picked-up the water heater and it is LP and motor assist, no electric. However, it is possible to add an element to control separately. At least it does not have a pilot light, it uses direct ignition.
I finally discovered that I could get replacement "wide" wiper blades from my local CarQuest, Prairie Grove Auto. CarQuest # 752-200 made by TRICO. They are considered "Heavy Duty." Needless to say, I ordered them the other day and installed them today. YEAH!
Posted are pics of the base of the Driver's wiper arm, close-up of the old clips reused on the new blade, close-up of the wiper blade mount, and of the new wiper blade.
The stainless steel strips that were part of the new refill had clips that would not engage the old stainless steel wiper frames that I needed to reuse in order to reattach the blades to the wiper arms. So I decided to reuse the strips and clips from the old wiper refills with the rubber from the new refill. The frames may be dirty and ugly, but they work! Because they tend to collect leaves and junk between them and the windshield, I am using little blocks of foam to hold the arms out and hence the blades away from the glass. This will prevent the accumulation of crap on them.
Owner of an Electronics Contract Manufacturing Company and a Renewable Energy/Energy Efficiency Company. I also provide roadside service for RVs. I am a libertarian and support the right to bear arms and support concealed carry.