Wednesday, August 4, 2010

'67 Dodge Mahaul Master Cylinder Rebuild Middle

I have completed modifications to the master cylinder for the remote reservoir. All I need to do now is do a finish hone of the cylinder to remove any paint over-spray, install the new pistons and check-valves in the MC, and partially fill and bench-bleed the MC. I have temporarily connected the hoses that were used on the Mitsubishi Eclipse for the pictures. I need to check the heights, but I should be able to mount the reservoir on the metal frame behind the engine and run the two hoses to the MC... maybe 3 feet away? Then I will need to create a dash LED to illuminate when the fluid level gets low.

I will be posting to the Yahoo Travco group asking how much interest there would be for a group buy on a kit including a used reservoir w/bracket, hoses, fittings, cap, gasket, clamps, and cover hold-down bolts. I would not do this to make money per-se, but to allow others to enjoy this upgrade. Quantities would affect the cost. Everything would be new except the reservoir, but I could find some new ones as well I am sure, I just pulled this off of one of my parts cars.

No comments: